В Гноме пропали панели - типовая проблема

Akme · 1 Мар 2010

Проблема типовая для Гнома, причём не только под Дебианом, как у меня:

Для просмотра скрытого содержимого вы должны войти или зарегистрироваться.

Могу предложить несколько кривых, но работающих

решений:
1) Создать нового пользователя, перегнать в него своё окружение и перескочить на этого пользака.
2) Так же можно продолжить работать, загружая гнома в аварийном режиме.

А вот типового красивого решения в Сети пока не видел

В журнале ошибок $HOME/.xsession-errors

/etc/gdm/Xsession: Beginning session setup...
SESSION_MANAGER=local/deb:/tmp/.ICE-unix/6440
Warning: No symbols defined for <SYRQ> (keycode 92)
Warning: No symbols defined for <II65> (keycode 101)
Warning: No symbols defined for <BRK> (keycode 114)
Warning: No symbols defined for <FK13> (keycode 118)
Warning: No symbols defined for <FK14> (keycode 119)
Warning: No symbols defined for <FK15> (keycode 120)
Warning: No symbols defined for <FK16> (keycode 121)
Warning: No symbols defined for <FK17> (keycode 122)
Warning: No symbols defined for <KPDC> (keycode 123)
Warning: No symbols defined for <XFER> (keycode 129)
Warning: No symbols defined for <I02> (keycode 130)
Warning: No symbols defined for <NFER> (keycode 131)
Warning: No symbols defined for <I04> (keycode 132)
Warning: No symbols defined for <AE13> (keycode 133)
Warning: No symbols defined for <I06> (keycode 134)
Warning: No symbols defined for <I07> (keycode 135)
Warning: No symbols defined for <I08> (keycode 136)
Warning: No symbols defined for <I09> (keycode 137)
Warning: No symbols defined for <I0A> (keycode 138)
Warning: No symbols defined for <I0B> (keycode 139)
Warning: No symbols defined for <I0C> (keycode 140)
Warning: No symbols defined for <I0D> (keycode 141)
Warning: No symbols defined for <I0E> (keycode 142)
Warning: No symbols defined for <I0F> (keycode 143)
Warning: No symbols defined for <I10> (keycode 144)
Warning: No symbols defined for <I11> (keycode 145)
Warning: No symbols defined for <I12> (keycode 146)
Warning: No symbols defined for <I13> (keycode 147)
Warning: No symbols defined for <I14> (keycode 148)
Warning: No symbols defined for <I15> (keycode 149)
Warning: No symbols defined for <I16> (keycode 150)
Warning: No symbols defined for <I17> (keycode 151)
Warning: No symbols defined for <I18> (keycode 152)
Warning: No symbols defined for <I19> (keycode 153)
Warning: No symbols defined for <I1A> (keycode 154)
Warning: No symbols defined for <I1B> (keycode 155)
Warning: No symbols defined for <K59> (keycode 157)
Warning: No symbols defined for <I1E> (keycode 158)
Warning: No symbols defined for <I1F> (keycode 159)
Warning: No symbols defined for <I20> (keycode 160)
Warning: No symbols defined for <I21> (keycode 161)
Warning: No symbols defined for <I22> (keycode 162)
Warning: No symbols defined for <I23> (keycode 163)
Warning: No symbols defined for <I24> (keycode 164)
Warning: No symbols defined for <I25> (keycode 165)
Warning: No symbols defined for <I26> (keycode 166)
Warning: No symbols defined for <I27> (keycode 167)
Warning: No symbols defined for <I28> (keycode 168)
Warning: No symbols defined for <I29> (keycode 169)
Warning: No symbols defined for <K5A> (keycode 170)
Warning: No symbols defined for <I2B> (keycode 171)
Warning: No symbols defined for <I2C> (keycode 172)
Warning: No symbols defined for <I2D> (keycode 173)
Warning: No symbols defined for <I2E> (keycode 174)
Warning: No symbols defined for <I2F> (keycode 175)
Warning: No symbols defined for <I30> (keycode 176)
Warning: No symbols defined for <I31> (keycode 177)
Warning: No symbols defined for <I32> (keycode 178)
Warning: No symbols defined for <I33> (keycode 179)
Warning: No symbols defined for <I34> (keycode 180)
Warning: No symbols defined for <K5B> (keycode 181)
Warning: No symbols defined for <K5D> (keycode 182)
Warning: No symbols defined for <K5E> (keycode 183)
Warning: No symbols defined for <K5F> (keycode 184)
Warning: No symbols defined for <I39> (keycode 185)
Warning: No symbols defined for <I3A> (keycode 186)
Warning: No symbols defined for <I3B> (keycode 187)
Warning: No symbols defined for <I3C> (keycode 188)
Warning: No symbols defined for <K62> (keycode 189)
Warning: No symbols defined for <K63> (keycode 190)
Warning: No symbols defined for <K64> (keycode 191)
Warning: No symbols defined for <K65> (keycode 192)
Warning: No symbols defined for <K66> (keycode 193)
Warning: No symbols defined for <I42> (keycode 194)
Warning: No symbols defined for <I43> (keycode 195)
Warning: No symbols defined for <I44> (keycode 196)
Warning: No symbols defined for <I45> (keycode 197)
Warning: No symbols defined for <K67> (keycode 198)
Warning: No symbols defined for <K68> (keycode 199)
Warning: No symbols defined for <K69> (keycode 200)
Warning: No symbols defined for <K6A> (keycode 201)
Warning: No symbols defined for <I4A> (keycode 202)
Warning: No symbols defined for <K6B> (keycode 203)
Warning: No symbols defined for <K6C> (keycode 204)
Warning: No symbols defined for <K6D> (keycode 205)
Warning: No symbols defined for <K6E> (keycode 206)
Warning: No symbols defined for <K6F> (keycode 207)
Warning: No symbols defined for <HKTG> (keycode 208)
Warning: No symbols defined for <KANA> (keycode 209)
Warning: No symbols defined for <EISU> (keycode 210)
Warning: No symbols defined for <AB11> (keycode 211)
Warning: No symbols defined for <I54> (keycode 212)
Warning: No symbols defined for <I55> (keycode 213)
Warning: No symbols defined for <I5A> (keycode 218)
Warning: No symbols defined for <K74> (keycode 219)
Warning: No symbols defined for <K75> (keycode 220)
Warning: No symbols defined for <K76> (keycode 221)
Warning: No symbols defined for <I5E> (keycode 222)
Warning: No symbols defined for <I5F> (keycode 223)
Warning: No symbols defined for <I60> (keycode 224)
Warning: No symbols defined for <I61> (keycode 225)
Warning: No symbols defined for <I62> (keycode 226)
Warning: No symbols defined for <I63> (keycode 227)
Warning: No symbols defined for <I64> (keycode 228)
Warning: No symbols defined for <I65> (keycode 229)
Warning: No symbols defined for <I66> (keycode 230)
Warning: No symbols defined for <I67> (keycode 231)
Warning: No symbols defined for <I68> (keycode 232)
Warning: No symbols defined for <I69> (keycode 233)
Warning: No symbols defined for <I6A> (keycode 234)
Warning: No symbols defined for <I6B> (keycode 235)
Warning: No symbols defined for <I6C> (keycode 236)
Warning: No symbols defined for <I6D> (keycode 237)
Warning: No symbols defined for <I6E> (keycode 238)
Warning: No symbols defined for <I6F> (keycode 239)
Warning: No symbols defined for <I70> (keycode 240)
Warning: No symbols defined for <I71> (keycode 241)
Warning: No symbols defined for <I72> (keycode 242)
Warning: No symbols defined for <I73> (keycode 243)
Warning: No symbols defined for <I74> (keycode 244)
Warning: No symbols defined for <I75> (keycode 245)
Warning: No symbols defined for <I76> (keycode 246)
Warning: No symbols defined for <I77> (keycode 247)
Warning: No symbols defined for <I78> (keycode 248)
Warning: No symbols defined for <I79> (keycode 249)
Warning: No symbols defined for <I7A> (keycode 250)
Warning: No symbols defined for <I7B> (keycode 251)
Warning: No symbols defined for <I7C> (keycode 252)
Warning: No symbols defined for <I7D> (keycode 253)
Warning: No symbols defined for <I7E> (keycode 254)
Warning: No symbols defined for <I7F> (keycode 255)

** (gnome-settings-daemon:6502

WARNING **: Failed to open file '/etc/gnome/config/General.ad': ╨Э╨╡╤В ╤В╨░╨║╨╛╨│╨╛ ╤Д╨░╨╣╨╗╨░ ╨╕╨╗╨╕ ╨║╨░╤В╨░╨╗╨╛╨│╨░
seahorse nautilus module initialized
Initializing gnome-mount extension
[31;01merror: option -s not recognized[0m
[31;01merror: option -s not recognized[0m

[01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m
[01mSystem Tray Status Service ver. 0.1[0m

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

[01mUsage: hp-systray [OPTIONS][0m

[01m[OPTIONS][0m
Force Qt3: --qt3 (default)
Force Qt4: --qt4
Startup even if no -x or --force-startup
hplip CUPS queues
are present:
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:

[31;01merror: option -s not recognized[0m

[01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m
[01mSystem Tray Status Service ver. 0.1[0m

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

[01mUsage: hp-systray [OPTIONS][0m

[01m[OPTIONS][0m
Force Qt3: --qt3 (default)
Force Qt4: --qt4
Startup even if no -x or --force-startup
hplip CUPS queues
are present:
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:

[01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m
[01mSystem Tray Status Service ver. 0.1[0m

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

[01mUsage: hp-systray [OPTIONS][0m

[01m[OPTIONS][0m
Force Qt3: --qt3 (default)
Force Qt4: --qt4
Startup even if no -x or --force-startup
hplip CUPS queues
are present:
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:

[31;01merror: option -s not recognized[0m
beagled will run in the background.
Use beagle-status to check progress of beagled.
For log files check /home2/.beagle/Log/current-Beagle.

[31;01merror: option -s not recognized[0m

[01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m
[01mSystem Tray Status Service ver. 0.1[0m

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

[01mUsage: hp-systray [OPTIONS][0m

[01m[OPTIONS][0m
Force Qt3: --qt3 (default)
Force Qt4: --qt4
Startup even if no -x or --force-startup
hplip CUPS queues
are present:
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:

[01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m
[01mSystem Tray Status Service ver. 0.1[0m

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

[01mUsage: hp-systray [OPTIONS][0m

[01m[OPTIONS][0m
Force Qt3: --qt3 (default)
Force Qt4: --qt4
Startup even if no -x or --force-startup
hplip CUPS queues
are present:
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:

(gnome-terminal:6590

GnomeUI-WARNING **: While connecting to session manager:
Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed.
[31;01merror: option -s not recognized[0m

[01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m
[01mSystem Tray Status Service ver. 0.1[0m

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

[01mUsage: hp-systray [OPTIONS][0m

[01m[OPTIONS][0m
Force Qt3: --qt3 (default)
Force Qt4: --qt4
Startup even if no -x or --force-startup
hplip CUPS queues
are present:
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:

** (x-session-manager:6440

WARNING **: Host name lookup failure on localhost.
Got accel 65481, 0, 0
Got keycode 96
Got modmask 0
** Message: Got disconnected from the session message bus; retrying to reconnect every 10 seconds

General-Beck · 11 Мар 2010

а что мешает создать новую панель? или воспользоваться альтернативой к примере awant либо cairo&

Akme · 12 Мар 2010

General-Beck написал(а):
а что мешает создать новую панель? или воспользоваться альтернативой к примере awant либо cairo&

предложите конкретную последовательность действий в этом направлении

- я вот, на момент выяснения причин и способов решения этой баги не нашёл таких вариантов

General-Beck · 12 Мар 2010

в данном случае можно попробовать отключить панель НР из загрузки, судя по логу, и посмотреть, что выйдет при рестарте иксов, ну и далее apt-get update&&apt-get upgrade

Akme · 13 Мар 2010

General-Beck написал(а):
в данном случае можно попробовать отключить панель НР из загрузки, судя по логу, и посмотреть, что выйдет при рестарте иксов, ну и далее apt-get update&&apt-get upgrade

Первое предложение похоже на некое рациональное зерно

- Как доберусь до той машины, на которой сие случилось - попробую ковырнуть. А, вот, второй пункт я там пробовал в каком-то другом контексте (непомню конкретно), что странно - не отработала эта последовательность - возможно ещё и апт-гет накрылся :confused:

General-Beck · 13 Мар 2010

ну иногда dpkg --configure -a выручает если с апт чего не в порядке

bosha · 13 Мар 2010

Есть суровый способ:

Код:

rm -rf ~/.gnome/

Все настройки пользователя удалятся, но если раньше было всё в порядке, то должно помочь. Можно даже так

Код:

mv ~/.gnome ~/.gnome.old

Если не помогло, то можно назад всё вернуть:

Код:

rm -rf ~/.gnome
mv ~/.gnome.old ~/.gnome

grindcore · 4 Май 2010

Код:

ctrl + alt + F1
sudo killall -9 gnome-panel gnome-panel-data
sudo dpkg-reconfigure gnome-panel && sudo dpkg-reconfigure gnome-panel-data
ctrl + alt + F7

мне както помогло.

Либо, как вариант, удалить конфиги и по - новой настроить панели.

Akme · 4 Май 2010

Ещё вариант, наверное самый простой и эффективный, с минимумом копаний для решения этой проблемы - удалить папку гнома из пользовательской домашней папки.

denisvd · 23 Июн 2010

Akme написал(а):
Проблема типовая для Гнома, причём не только под Дебианом, как у меня:
*** скрытое содержание ***
Могу предложить несколько кривых, но работающих решений:
1) Создать нового пользователя, перегнать в него своё окружение и перескочить на этого пользака.
2) Так же можно продолжить работать, загружая гнома в аварийном режиме.
А вот типового красивого решения в Сети пока не видел
В журнале ошибок $HOME/.xsession-errors

/etc/gdm/Xsession: Beginning session setup...
SESSION_MANAGER=local/deb:/tmp/.ICE-unix/6440
Warning: No symbols defined for <SYRQ> (keycode 92)
Warning: No symbols defined for <II65> (keycode 101)
Warning: No symbols defined for <BRK> (keycode 114)
Warning: No symbols defined for <FK13> (keycode 118)
Warning: No symbols defined for <FK14> (keycode 119)
Warning: No symbols defined for <FK15> (keycode 120)
Warning: No symbols defined for <FK16> (keycode 121)
Warning: No symbols defined for <FK17> (keycode 122)
Warning: No symbols defined for <KPDC> (keycode 123)
Warning: No symbols defined for <XFER> (keycode 129)
Warning: No symbols defined for <I02> (keycode 130)
Warning: No symbols defined for <NFER> (keycode 131)
Warning: No symbols defined for <I04> (keycode 132)
Warning: No symbols defined for <AE13> (keycode 133)
Warning: No symbols defined for <I06> (keycode 134)
Warning: No symbols defined for <I07> (keycode 135)
Warning: No symbols defined for <I08> (keycode 136)
Warning: No symbols defined for <I09> (keycode 137)
Warning: No symbols defined for <I0A> (keycode 138)
Warning: No symbols defined for <I0B> (keycode 139)
Warning: No symbols defined for <I0C> (keycode 140)
Warning: No symbols defined for <I0D> (keycode 141)
Warning: No symbols defined for <I0E> (keycode 142)
Warning: No symbols defined for <I0F> (keycode 143)
Warning: No symbols defined for <I10> (keycode 144)
Warning: No symbols defined for <I11> (keycode 145)
Warning: No symbols defined for <I12> (keycode 146)
Warning: No symbols defined for <I13> (keycode 147)
Warning: No symbols defined for <I14> (keycode 148)
Warning: No symbols defined for <I15> (keycode 149)
Warning: No symbols defined for <I16> (keycode 150)
Warning: No symbols defined for <I17> (keycode 151)
Warning: No symbols defined for <I18> (keycode 152)
Warning: No symbols defined for <I19> (keycode 153)
Warning: No symbols defined for <I1A> (keycode 154)
Warning: No symbols defined for <I1B> (keycode 155)
Warning: No symbols defined for <K59> (keycode 157)
Warning: No symbols defined for <I1E> (keycode 158)
Warning: No symbols defined for <I1F> (keycode 159)
Warning: No symbols defined for <I20> (keycode 160)
Warning: No symbols defined for <I21> (keycode 161)
Warning: No symbols defined for <I22> (keycode 162)
Warning: No symbols defined for <I23> (keycode 163)
Warning: No symbols defined for <I24> (keycode 164)
Warning: No symbols defined for <I25> (keycode 165)
Warning: No symbols defined for <I26> (keycode 166)
Warning: No symbols defined for <I27> (keycode 167)
Warning: No symbols defined for <I28> (keycode 168)
Warning: No symbols defined for <I29> (keycode 169)
Warning: No symbols defined for <K5A> (keycode 170)
Warning: No symbols defined for <I2B> (keycode 171)
Warning: No symbols defined for <I2C> (keycode 172)
Warning: No symbols defined for <I2D> (keycode 173)
Warning: No symbols defined for <I2E> (keycode 174)
Warning: No symbols defined for <I2F> (keycode 175)
Warning: No symbols defined for <I30> (keycode 176)
Warning: No symbols defined for <I31> (keycode 177)
Warning: No symbols defined for <I32> (keycode 178)
Warning: No symbols defined for <I33> (keycode 179)
Warning: No symbols defined for <I34> (keycode 180)
Warning: No symbols defined for <K5B> (keycode 181)
Warning: No symbols defined for <K5D> (keycode 182)
Warning: No symbols defined for <K5E> (keycode 183)
Warning: No symbols defined for <K5F> (keycode 184)
Warning: No symbols defined for <I39> (keycode 185)
Warning: No symbols defined for <I3A> (keycode 186)
Warning: No symbols defined for <I3B> (keycode 187)
Warning: No symbols defined for <I3C> (keycode 188)
Warning: No symbols defined for <K62> (keycode 189)
Warning: No symbols defined for <K63> (keycode 190)
Warning: No symbols defined for <K64> (keycode 191)
Warning: No symbols defined for <K65> (keycode 192)
Warning: No symbols defined for <K66> (keycode 193)
Warning: No symbols defined for <I42> (keycode 194)
Warning: No symbols defined for <I43> (keycode 195)
Warning: No symbols defined for <I44> (keycode 196)
Warning: No symbols defined for <I45> (keycode 197)
Warning: No symbols defined for <K67> (keycode 198)
Warning: No symbols defined for <K68> (keycode 199)
Warning: No symbols defined for <K69> (keycode 200)
Warning: No symbols defined for <K6A> (keycode 201)
Warning: No symbols defined for <I4A> (keycode 202)
Warning: No symbols defined for <K6B> (keycode 203)
Warning: No symbols defined for <K6C> (keycode 204)
Warning: No symbols defined for <K6D> (keycode 205)
Warning: No symbols defined for <K6E> (keycode 206)
Warning: No symbols defined for <K6F> (keycode 207)
Warning: No symbols defined for <HKTG> (keycode 208)
Warning: No symbols defined for <KANA> (keycode 209)
Warning: No symbols defined for <EISU> (keycode 210)
Warning: No symbols defined for <AB11> (keycode 211)
Warning: No symbols defined for <I54> (keycode 212)
Warning: No symbols defined for <I55> (keycode 213)
Warning: No symbols defined for <I5A> (keycode 218)
Warning: No symbols defined for <K74> (keycode 219)
Warning: No symbols defined for <K75> (keycode 220)
Warning: No symbols defined for <K76> (keycode 221)
Warning: No symbols defined for <I5E> (keycode 222)
Warning: No symbols defined for <I5F> (keycode 223)
Warning: No symbols defined for <I60> (keycode 224)
Warning: No symbols defined for <I61> (keycode 225)
Warning: No symbols defined for <I62> (keycode 226)
Warning: No symbols defined for <I63> (keycode 227)
Warning: No symbols defined for <I64> (keycode 228)
Warning: No symbols defined for <I65> (keycode 229)
Warning: No symbols defined for <I66> (keycode 230)
Warning: No symbols defined for <I67> (keycode 231)
Warning: No symbols defined for <I68> (keycode 232)
Warning: No symbols defined for <I69> (keycode 233)
Warning: No symbols defined for <I6A> (keycode 234)
Warning: No symbols defined for <I6B> (keycode 235)
Warning: No symbols defined for <I6C> (keycode 236)
Warning: No symbols defined for <I6D> (keycode 237)
Warning: No symbols defined for <I6E> (keycode 238)
Warning: No symbols defined for <I6F> (keycode 239)
Warning: No symbols defined for <I70> (keycode 240)
Warning: No symbols defined for <I71> (keycode 241)
Warning: No symbols defined for <I72> (keycode 242)
Warning: No symbols defined for <I73> (keycode 243)
Warning: No symbols defined for <I74> (keycode 244)
Warning: No symbols defined for <I75> (keycode 245)
Warning: No symbols defined for <I76> (keycode 246)
Warning: No symbols defined for <I77> (keycode 247)
Warning: No symbols defined for <I78> (keycode 248)
Warning: No symbols defined for <I79> (keycode 249)
Warning: No symbols defined for <I7A> (keycode 250)
Warning: No symbols defined for <I7B> (keycode 251)
Warning: No symbols defined for <I7C> (keycode 252)
Warning: No symbols defined for <I7D> (keycode 253)
Warning: No symbols defined for <I7E> (keycode 254)
Warning: No symbols defined for <I7F> (keycode 255)
** (gnome-settings-daemon:6502 WARNING **: Failed to open file '/etc/gnome/config/General.ad': ╨Э╨╡╤В ╤В╨░╨║╨╛╨│╨╛ ╤Д╨░╨╣╨╗╨░ ╨╕╨╗╨╕ ╨║╨░╤В╨░╨╗╨╛╨│╨░
seahorse nautilus module initialized
Initializing gnome-mount extension
[31;01merror: option -s not recognized[0m
[31;01merror: option -s not recognized[0m
[01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m
[01mSystem Tray Status Service ver. 0.1[0m
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
[01mUsage: hp-systray [OPTIONS][0m
[01m[OPTIONS][0m
Force Qt3: --qt3 (default)
Force Qt4: --qt4
Startup even if no -x or --force-startup
hplip CUPS queues
are present:
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:
[31;01merror: option -s not recognized[0m
[01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m
[01mSystem Tray Status Service ver. 0.1[0m
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
[01mUsage: hp-systray [OPTIONS][0m
[01m[OPTIONS][0m
Force Qt3: --qt3 (default)
Force Qt4: --qt4
Startup even if no -x or --force-startup
hplip CUPS queues
are present:
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:
[01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m
[01mSystem Tray Status Service ver. 0.1[0m
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
[01mUsage: hp-systray [OPTIONS][0m
[01m[OPTIONS][0m
Force Qt3: --qt3 (default)
Force Qt4: --qt4
Startup even if no -x or --force-startup
hplip CUPS queues
are present:
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:
[31;01merror: option -s not recognized[0m
beagled will run in the background.
Use beagle-status to check progress of beagled.
For log files check /home2/.beagle/Log/current-Beagle.
[31;01merror: option -s not recognized[0m
[01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m
[01mSystem Tray Status Service ver. 0.1[0m
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
[01mUsage: hp-systray [OPTIONS][0m
[01m[OPTIONS][0m
Force Qt3: --qt3 (default)
Force Qt4: --qt4
Startup even if no -x or --force-startup
hplip CUPS queues
are present:
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:
[01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m
[01mSystem Tray Status Service ver. 0.1[0m
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
[01mUsage: hp-systray [OPTIONS][0m
[01m[OPTIONS][0m
Force Qt3: --qt3 (default)
Force Qt4: --qt4
Startup even if no -x or --force-startup
hplip CUPS queues
are present:
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:
(gnome-terminal:6590 GnomeUI-WARNING **: While connecting to session manager:
Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed.
[31;01merror: option -s not recognized[0m
[01mHP Linux Imaging and Printing System (ver. 2.8.6b)[0m
[01mSystem Tray Status Service ver. 0.1[0m
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
[01mUsage: hp-systray [OPTIONS][0m
[01m[OPTIONS][0m
Force Qt3: --qt3 (default)
Force Qt4: --qt4
Startup even if no -x or --force-startup
hplip CUPS queues
are present:
Set the logging -l<level> or --logging=<level>
level:
<level>: none, info*, error, warn, debug (*default)
Run in debug mode: -g (same as option: -ldebug)
This help -h or --help
information:
** (x-session-manager:6440 WARNING **: Host name lookup failure on localhost.
Got accel 65481, 0, 0
Got keycode 96
Got modmask 0
** Message: Got disconnected from the session message bus; retrying to reconnect every 10 seconds

Можно создать нового пользователя, а потом посмотреть разницу в конфигах в папке ~/.gnome

В Гноме пропали панели - типовая проблема

Akme

Творец буковок

General-Beck

Постоялец

Akme

Творец буковок

General-Beck

Постоялец

Akme

Творец буковок

General-Beck

Постоялец

bosha

Создатель

grindcore

Писатель

Akme

Творец буковок

denisvd

Создатель